Monday, May 30, 2011

Thank you Jinger!!!

Hey Ya'll,
First of all, we hope you all have a wonderful Memorial Day.  Time to be the "Sassy Dude" again.  Sheila at She's a Sassy Lady invited me to be a guest designer again and I really hope you all think that this project is worthy of such an honor.  If you didn't know, we were featured on HSN's launch of the Anniversary Edition of the Cricut Expression.  They showed my Scrapbook Layout on air. Jinger Adams (Provocraft Spokesperson) made some very sweet comments about the layout and pointed out some of the more difficult techniques that I used.  I had this thought in my head for a card and wanted to really test the limits of the new machine when it comes to precision, so I finally had the chance to fulfill my thought and create this card.  Please enjoy and I would love it if you downloaded the file and gave it a try!
To start, I wanted to share the Flower Cart Card Gypsy File with you.  Just a warning, this takes a long time to cut all of these little flowers.  The end result is fantastic, but it took about an hour to cut one 12x12 sheet of all the little blossoms.
First of all, I created the flower cart using the Gypsy and welding the different pieces together.  There are extra pieces that cut with this file, but they give you more options for layering and also insures that you have a really well cut piece.  The E2 is so improved with the cutting from the original expression that, fortunately, I didn't  have any bad cuts, but the older expression would usually leave a couple of things that took extra effort to have really precise cuts.
The second Gypsy Screen is all the little flowers and the wheels for the cart.  This is the page that takes a long time to cut.
This shows how I laid out the colors for the flowers and wheels page.  You can choose any colors you want, but I thought this may help in how I did mine.
Once everything was cut, I actually left everything on the mat for a bit and used several different colored markers and a white opaque pen to detail all of these little blossoms.
  This is what the mat looks like when you pull off the extra paper.
 Once you have all of your flowers detailed, remove them from the mat and sit them aside.  You can use a stylus to shape some of the flowers.  I shaped about 2/3rds of each group of flowers.  I wanted some left flat for the background.  I used a 1/2" thick foam mat and the back of the Cuttlebug Quilling tool.  This is perfect for this technique.  Simply roll the stylus in a circular motion on the back of the flower and this will round out the flower.
 Then flip the flower over and use the tip of a pen or other pointed object (I used a Gypsy stylus) and press in the center of the flower on the face.  This will press in the middle, but your petals will stay rounded.
This is a look at a couple of the other flowers using the same technique.  To prepare the base, I used a blue mat for the background and then used scissors to cut a grassy background.  Then added some of the grass cuts to the bottom.  I also inked everything with a chocolate ink.
To assemble your card, start with the top of the cart.  This shows how I used the 3D adhesive on part of the awning and then regular scrappy glue on the other side.  This way the awning angles out.
 Use the extra rectangle pieces on the left and right sides with 3D adhesive to make the posts for the cart roof.  Then assemble the bottom of the cart.
I used a metallic brad on the center of each wheel and then glued it to the bottom of the cart.
Once your cart is all assembled, start adding your flowers.  Starting with the flat blossoms, arrange the flowers to look like a retail cart in little clumps.  While arranging the flowers, remember to add some of the green vines here and there as well.  Glue shaped flowers on top. Make sure that you save a few of the blossoms for the inside of the card.
You can see here how the different layers of the flowers really stand out.  I also added a couple of grassy pieces on the bottom of the wheels as well.  I then used Glossy Effects for the centers of the flowers and to make the Fresh Flowers on the top of the cart to stand out even more.
 For the inside of the card, I used the Gypsy to weld together the sentiment.  I thought that Thanks Bunches worked out perfectly with this design.  I also added a bouquet of flowers to the inside as well.
 This does become thick for the inside of the card, but you will see that a box was the perfect thing to make for this card.
 For the little bouquet, I simply used a piece of a heart lacy doily and cut it into a rectangle.
I used a small piece of ribbon to tie up the bouquet wrap.  I glued this directly to the inside mat.  I then added flowers and greenery until it looked like exactly like a handheld bouquet.  Now this is a larger than normal card.  This is actually 6" x 9".  I have a very simple technique to making the box.
For this box technique, you can actually use any scoreboard that you want.  I have a Martha Stewart board, so that's what I used.  You just need a straight edge measured to 1/2 inch for this entire box.  The precision is based on how well you measure your top and bottom piece.  Since this is a 6"x9" card, you will need to cut a piece of cardstock for the bottom at 7 1/8" x 10 1/8".  For the top, you need to cut the second piece 7 3/16" x 10 3/16".
Score all four sides at 1/2".  This picture shows the scoring lines.
Once scored, simply use a good pair of scissors and cut a small wedge out on the corners as shown in the above picture.
Fold the corners as shown above.  Once everything is folded, add a little bit of good paper glue on the little flap and stick together.
Once you have the corner glued, simply add a clamp or a paper clip to hold and move on to the next corner.
While the corners dry, simply cut mats to decorate your box however you want.  I cut three liner pieces 6"x9".  One for the top inside, one for the bottom inside and one for the top on the outside.  I also added a couple of smaller mats to really decorate the top of it.
You can see in this picture (above) just how precise this card box turns out.  By measuring your cuts and scoring in the same place, you have the perfect alignment and the perfect cover for your creation.  You can see in the bottom left picture so precise the card fits inside the box and how important it is to have the 1/2" thickness as the card has so many layers.
Thank you so much for visiting today!  I would love to hear your comments and I really hope that Jinger will stop by and comment as well.  Be sure to check out She's a Sassy Lady everyday for wonderful projects by our friends and thank you SO much Sheila for inviting me again to be a guest designer.  Most Sincerely, Bobby


24 comments:

  1. Love your card. YOu did a wonderful job. TFS

    ReplyDelete
  2. Wow- you never fail to amaze me with such great talent! I absolutely love it- it's stunning!

    ReplyDelete
  3. Goodness, I'm tired just looking at the pictures of all this work! I truly don't believe I could part with such a fantastic creation.

    ReplyDelete
  4. OMGosh!!! This is unbelievable! I love everything about it.I've never downloaded a gypsy file or changed a DS file to a gypsy file. Right now I'm waiting on my replacement Gypsy. With the E2 I guess I will have to learn to do these things. I would love to try this spectacular card. As alwaus thanks for the inspiration.

    ReplyDelete
  5. I don't even know where to begin...I am so amazed at the beauty of this card, I'm speechless! Go ahead...ask my husband...that NEVER happens! This is truly an amazing piece of art...just stunning! Bravo!

    ReplyDelete
  6. WOW!!! That is amazing! I am sure that Jinger will LOVE that!!!

    ReplyDelete
  7. Wonderful!!!!!!!!!! This is gorgeous - the detail in the flowers and all the flowers have truly turned this into a work of art! L-O-V-E!
    Hugs,
    M

    ReplyDelete
  8. WOW!!!!! what great inspiration you are.... I'm now following... can't wait to see what's next
    --Robin

    ReplyDelete
  9. This is such an amazing card! I just can't get over the detail and all the beautiful colors on this card. Thank you so much for sharing your talent with us on She's A Sassy Lady today.

    ReplyDelete
  10. WOW! Your card is amazing. I can sure see the love that you put into the card. Fran

    ReplyDelete
  11. This is GORGEOUS! I have to close my mouth cause it's dropping to the floor! This is completely AMAZING! I LOVE the flowers on the inside of the card as well.... GOSH! You are WAYYYYY to TALENTED!!!! Lots, Lots, of work here.... thank you so much for sharing it! :o)
    Theresa

    ReplyDelete
  12. Wow ! Awesome ! I can see it was a lot of work but the end result is gorgeous !

    ReplyDelete
  13. S-P-E-C-T-A-C-U-L-A-R!!!!
    AND SUPERSCRAPALICIOUS!!! I am running out of words with you!!1 lol
    AMAZING! and I do know all the work it took for all that detail and all those cuts!!! (My E2 is not that precise?... it misses a bit here and there...maybe I am putting too much pressure when I insert mat?) ---
    I leave you with an O - M - G!!!!

    ReplyDelete
  14. WOW! That is super gorgeous!! Thank you for the instructions. You did a fabulous job!! This needs to be in the Cricut Magazine. :)

    Shawnee

    ReplyDelete
  15. OH WOW!!!! This is awesome. This is truly a keepsake.

    ReplyDelete
  16. This is truly for the most card worthy friend/family member ;)

    ReplyDelete
  17. Whoa! Whoa! Whoa! This is beyond gorgeous!You are so very talented!!

    ReplyDelete
  18. You make the coolest stuff!! How gorgeous is this?! Wish I had even a small portion of your talent!! Thanks for sharing

    ReplyDelete
  19. Disewdi - a NEW ADMIRER!!!!June 3, 2011 at 3:55 PM

    Everyone else has already said it, but I just have to say it again -- GORGEOUS!! I have looked high and low for the actual flower cart with search on Gypsy, but can't find it anywhere! Did you just use parts and pieces to cut it out??? I'm trying the flowers until I can make the cart!!!

    ReplyDelete
  20. Fantastic...thanks for sharing the fruits of your labor...

    ReplyDelete
  21. OMG Bobby you amaze me.....this is so so awesome! And thanks for the great instructions and cut file. I so want to try this one, but don't have the E2 so i am afraid that my E would not cut so precise This has to be at the top of my list of favorites but then they all are LOL

    ReplyDelete